Wuxi Sylaith Special Steel Co., Ltd.
Wuxi Sylaith Special Steel Co., Ltd.
Add to Cart
Sublimation 6061 Aluminum Sheet 1050 1060 5754 3003 5005 5052 5083 6061 6063 7075 Alloy Aluminum Sheet
Product Description:
Aluminum plate specific cleaning steps are as follows:
1, the first to use amount of top water wash plate surface;
2, use the water diluted detergent soft cloth gently brush try board face;
3, with plenty of clean water to rinse the plate again, to wash away dirt;
4, check the board face, for no wash clean with detergent key;
5, board face, wash with water, until the detergent wash it all.
Note: don't wash hot plate (temperature more than 40 ° C), because the evaporation of water too fast is harmful to the surface of the lacquer that bake.
| Name | Sublimation Aluminum Sheet 1050 1060 5754 3003 5005 5052 5083 6061 6063 7075 T26 T6 Aluminum Sheet |
| Grade | 1000,2000,3000,4000,5000,6000,7000 |
| Model | 1050,1060,2019,2024,3003,3004,4032,5052,5083,6061,6063,7003,7075 |
| Technolog | Hot Rolled or Cold Rolled |
| Certification | SONCAP, ISO9001:2000 |
| Thickness | 0.3mm-100mm |
| Width Range | 20mm-2200 mm |
| Length | 20mm-8000mm or as your requirement. |
| Purposes | Furniture/decorate/industry/construction |
| Sample | Available |
| Temper | O,H14,H16,H18,H22,H24,H26,H32,H34,H112 T4,T651 Etc. |
| Application | Aluminum window, door, curtain wall, hand railing, normal aluminum profile, decorative and industrial aluminum profile |
| Container Size | 20FT GP: 5898mm(Length)X2352mm(Width)X2393mm(High) 40FT GP: 12032mm(Length)X2352mm(Width)X2393mm(High) 40FT HC: 12032mm(Lengh)X2352mm(Width)X2698mm(High) |
| Kind Attention | Specification can be customized as the customer's requirements. |
Chemical Composition:
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | ||
| Single | Total | |||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | — | 0.05 | V:0.05 | 0.03 | 0.03 | — | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | — | 0.05 | V:0.05 | 0.03 | 0.03 | — | 99.6 |
| 2024 | 0.5 | 0.5 | 3.8～4.9 | 0.30～0.9 | 1.2～1.8 | 0.1 | 0.25 | — | 0.15 | 0.05 | 0.15 | Rem |
| 3003 | 0.6 | 0.7 | 0.05～0.20 | 1.0～1.5 | — | — | 0.1 | — | — | 0.05 | 0.15 | Rem |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0～1.5 | 0.8～1.3 | — | 0.25 | — | — | 0.05 | 0.15 | Rem |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2～2.8 | 0.15～0.35 | 0.1 | — | — | 0.05 | 0.15 | Rem |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40～1.0 | 4.0～4.9 | 0.05～0.25 | 0.25 | — | 0.15 | 0.05 | 0.15 | Rem |
| 6061 | 0.40～0.8 | 0.7 | 0.15～0.40 | 0.15 | 0.8～1.2 | 0.04～0.35 | 0.25 | — | 0.15 | 0.05 | 0.15 | Rem |
| 6063 | 0.20～0.6 | 0.35 | 0.1 | 0.1 | 0.45～0.9 | 0.1 | 0.1 | — | 0.1 | 0.05 | 0.15 | Rem |
| 7003 | 0.3 | 0.35 | 0.2 | 0.3 | 0.50～1.0 | 0.2 | 5.0～6.5 | — | 0.2 | 0.05 | 0.15 | Rem |
| 7075 | 0.4 | 0.5 | 1.2～2.0 | 0.3 | 2.1～2.9 | 0.18～0.28 | 5.1～6.1 | — | 0.2 | 0.05 | 0.15 | Rem |
Mechanical Property:
| Mechanical Property | ||||||||
| ALUMINUM ALLOY | Grade | Normal Temper | Temper | Tensile Strength N/mm² | Yield Strength N/mm² | Elongation% | Brinell Hardness HB | |
| Plate | Bar | |||||||
| 1XXX | 1050 | O,H112,H | O | 78 | 34 | 40 | - | 20 |
| 1060 | O,H112,H | O | 70 | 30 | 43 | - | 19 | |
| Al-Cu (2XXX) | 2019 | O,T3,T4,T6,T8 | T851 | 450 | 350 | 10 | - | - |
| 2024 | O,T4 | T4 | 470 | 325 | 20 | 17 | 120 | |
| Al-Mn (3XXX) | 3003 | O,H112,H | O | 110 | 40 | 30 | 37 | 28 |
| 3004 | O,H112,H | O | 180 | 70 | 20 | 22 | 45 | |
| Al-Si (4XXX) | 4032 | O,T6,T62 | T6 | 380 | 315 | - | 9 | 120 |
| Al-Mg (5XXX) | 5052 | O,H112,H | H34 | 260 | 215 | 10 | 12 | 68 |
| 5083 | O,H112,H | O | 290 | 145 | - | 20 | - | |
| Al-Mg-Si (6XXX) | 6061 | O,T4,T6,T8 | T6 | 310 | 275 | 12 | 15 | 95 |
| 6063 | O,T1,T5,T6,T8 | T5 | 185 | 145 | 12 | - | 60 | |
| Al-Zn-Mg (7XXX) | 7003 | T5 | T5 | 315 | 255 | 15 | - | 85 |
| 7075 | O,T6 | T6 | 570 | 505 | 11 | 9 | 150 | |
Product Details:
Certification:
Package:
FAQ:
Q1: ARE YOU FACTORY OR TRADER?
A1: Sylaith Special Steel is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: HOW TO GET A SAMPLE?
A2: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q3: HOW TO VISIT YOUR FACTORY?
A3: Most of the main cities have flights to Shanghai; you can take flight to Shanghai Putong/Hongqiao International Airport.
If you come from Hongkong, it will take 2 hours by flight (every day 5 flight around noon time).